The last class I’m showing you about the CKC convention is Home Grown Cards with Basic Grey. Check out the YouTube video on the class presentation. For the most part I just followed right along with the instructions. There were a few techniques like using glue dots with micro beads (far right pear card), using stencils with mist and pen-work (direct middle, back; hard to see). The techniques were nothing very new to me. Also the colors of the collection felt to grunge for my current color taste. Most of the sentiments were not wording I would use for everyday cards. All in all, it was not my favorite class, but I think it was really taste dependent. If you like Basic Grey or this color pallet, I would say go for it.
My favorite card was the front one that I made inspired by one of the design layouts but I mixed it up since I had accidentally cut apart the intended greeting image. I like the brighter pink/yellow/green pallet with brown just for contrast. Plus the four color-blocked design works really well I think. I don’t know why I’ve not tried the color-blocking on cards before.
Final thoughts, look over the instructions and projects first to make sure you have all the parts you need for making the projects you want to follow step by step. Then feel free to mix, match and even change entirely the things you want to change.
I’ve seen this done a million times and have tried it a couple of times but wanted to try again.
Task: Use a baby wipe and re-inkers to create your own ink pad.
My take: Tried to use colors to get a rainbow effect.
Results: The inks didn’t mix as well as I thought they would to get color blending and the lines of ink that I squired onto the pad showed up in the stamping. Not my favorite and I won’t likely do this one much. But it is different and colorful. I just threw together a whole batch of simple thank you cards to have on hand when needed.
A few days ago I showed how I was doing a challenge to die cut some materials to use as stamps. Fun foam was the example and I didn’t have any at the time. But a trip to the craft store, for something entirely different, lead me past the fun foam isle! Plus, my first try at this technique ended up way to busy and I wanted a cleaner look. So here is what I did.
Task: Die cut fun foam to use a stamp. Then use the foam shape as an accent piece.
My take: I used fun foam as well the other materials I had tried and liked (cork & rubber shelf liner). I gave each heart a shadow using one of the other materials as a stamp.
Results: I like it. The fun foam stamped very nicely and worked well as a bonus embellishment. The only issue I had with this card was the stitching. The rubber shelf liner caused the presser foot on my machine to drag. I may have use a piece of was paper over it to get it to flow smoothly through the machine and then torn away the paper later.
I’ve never done this technique before and wasn’t sure how it would work.
Task: Stamp a background stamp using white pigment ink on white cardstock then overstamp with images to get the background stamp to “bleed through” the images.
My take: I did just that.
Results: Interesting. I wonder how different it would look if the background stamp where done right over the top of the image. Right now the impression this technique gives is that the images is in the background. It may be different with different backgrounds and/or images. And on a technical note, my background stamp was not completely clean when I stamped with it so my white ink had a slight pink tinge to it.
Task: Adhere die cuts to same color background to mimic embossing.
My Take: I did just that.
Results: Looks pretty good. My only issue is that my die cut machine cutting plates are a bit thick for the wafter thin die I was using and I got some unintended impressions from the die.
A couple of days ago I posted about using a single stamp to get more than one style out of it. I got 2 when I posted and today I am here with the third. Today’s style is artsy with a watercolor resist technique.
Task: Use one stamp set to get different looks.
My take: Before I used this set to get a funky retro color vibe, an elegant/formal card and today is watercolor/artsy.
Results: I used embossing ink and clear powder on the smooth side of watercolor paper to stamp my images and then used ink pads and water to blend color around the embossed images to create the water color resist. I’m very happy with how it came out. Initially I had stamped the sentiment and then spritzed some water over the sentiment to get it to soften it, but it bled out in jagged, fractal like patterns that was unpleasant. So I just made another sentiment flag to cover up the ugly. Done!
Okay, I have my one stamp but I only got two ways out of it so far. But I do have plans for a third way so stay tuned!
Task: Take one stamp set and use it to make 3 different styles of cards.
My take: Make a retro funky style, an elegant style and an artsy style.
Results: I didn’t get to the artsy style yet. This stamp set seems to really fit that task well since it is already distressed in nature. I plan on a watercolor look. Watch for that post. For this challenge I wanted to see how different I could get. So I used some highlighter markers to ink my stamp and get funky color and movement. Getting everything lined up (I ended up using a stamp positioner) was a pain. Clear stamps would have made this job WAY easier. The elegant card came out very well I think with the fruit stamp being shadded with ink and embossed with thick embossing powder. Adding a touch of gold washi finished it off. I’m happy with how I got different looks out of this same set. Good challenge!
Just a couple of quick pictures of what I’m working on.
Task 1: Die cut fun foam and use it as a stamp.
My take: I didn’t have fun foam so I looked around for anything textural I could use that was thin enough to be cut with thin dies (although steel ruled dies and thicker materials were an option). I found thin cork (top heart), rubber shelf liner (middle heart) and sticky-back felt (lower heart) to cut. I used them as stamps then adhered them to the project too.
Result: Well the card layout is just too busy, but that is another problem altogether! Stamping with each material was doable but needed a little finessing. The felt and cork both absorbed a lot of color from the ink and became very dark, so using them as accent pieces made the color too heavy. I would have used them to stamp light colors of ink instead. My favorite was actually the rubber shelf liner it have fun texture and held the ink fairly well. I will try another design layout with these same materials for a cleaner and simpler design. Fingers crossed.
Task 1: Use ink pads direct to paper to create custom paper colors to match stamping.
My take: I used ink to create a paper strip that would highlight the negative space of the leftovers from the first card. I then stamped the message with the same ink for a balanced design.
Result: I really like the texture and color of this card. The subtle xoxo stamping was done with Versamark achieving tone on tone movement and balance. Very happy with the results here.
If you read my last post you know I am taking a class and prompt #1 is to play with embossing. I didn’t have most of the items needed so tonight I tried some alternative ideas. Here is the report of what I tried.
Task 1: Make a multicolor embossed background. Use Post-It tape to mask off areas after inking with embossing ink. Add color 1 of embossing. Remove some masking. Add color 2. Repeat for all masking.
My Take: Use washi tape instead of Post-It tape.
Result: Washi tape was too sticky. It left sticky residue which clung to the embossing powder. It also lifted some of the embossing ink and thus get crisp images. (I used black, copper and silver embossing powders. Can you see all the colors? That part was lovely.)
Task 2: Make a faux ceramic tile. Using a chipboard element called Inchies, mask it, then die cut the whole thing with a wafter-thin die to just cut the masking paper while embossing the Inchie underneath to allow texture and different masked areas for inking. Cover the whole tile with clear embossing powder to get a ceramic look.
My Take: I used Avery label paper sheets as a masking paper replacement. I tried to reduce the sticky factor by running the sticky on my pants before using it. To replace the Inchies I simply cut chipboard into circles using a steel-ruled die.
Result: Masking paper was still too sticky. After running it through the die cutter, it adhered to the chipboard and peeled off the top layer when I tried to remove it to ink. This left an unpleasant fuzzy texture. The chipboard was just too dark to get the bright pops of color that the technique had. I do have thinner white chipboard so I may try again with that. (However, it may be too thin and the die may cut through it instead of embossing it.)
Task: Use different colors of embossing powder to create cool backgrounds.
My Take: Since I don’t have many different colors of embossing powder I tried making my own using clear embossing powder and Pearl Ex (an old, old stash item).
Result: I started with about a 2:1 ratio of powder to Pearl Ex and that was too much Pearl Ex (the white piece was stamped at this ratio). It did not allow a nice texture with the emboss. For the black paper I added more embossing powder for a 4:1 ratio. That worked better, gave nice color and nice embossed texture. As you can see the colors of Pearl Ex acted differently on white paper than black paper so this is important if you want a specific color for a project! One other note about the Pearl Ex: use an anti-static powder liberally before embossing because the Pearl Ex is VERY staticky and will stick to everything. After using the anti-static it still stuck to everything but was easy to wipe away using a baby wipe AFTER the heat embossing was finished.
Experiment with these things for yourself and see what you think!
With holidays, illness and injury I have a backlog of Scraptastic Kits sitting on my desk. I started the club in September of ’13 as I talked about here and here. I’ve been really pleased with the usability, trendiness and quality of the kits that have come in the mail, even though I haven’t touched most of them. Well, the past two weeks have changed that! I worked a little bit from each of the backlogged kits and I have to say that I’ve loved most of what I used. Let me show you a sampling.
This one cam from the December Just Breathe kit + extra wood veneer + extra cut apart sheet. I used the sketch featured in Scraptastic’s blog about teaming up with Page Maps to provide a sketch challenge. I really enjoyed using the sketch. My process usually involves drawing up my own sketch before I start a page. But for these photos I had a really lackluster idea. This Page Maps sketch fit my two small photos perfectly and added some pizzazz to my layout that I don’t think I would have come up with on my own.
Then from the October Never Tear Us Apart kit, I made two layouts using the same basic sketch (my own). I don’t mind making very duplicate layouts when they are stored in separate albums. I’ve done this before and I’m sure I will do it over and over again. It saves me energy and I can get more scrapped! I just made slight adjustment to accommodate different numbers and sizes of photos. When I use lots of pictures I keep the layout very simple to let the photos and story stay central.
Here is one more set of duplicate layouts using the October Never Tear Us Apart kit. I was running low on the large alpha stickers for titles in this kit so I used them to emphasize the date and made a more detailed title on the Cricut and cut it from some of the colorful chevron paper for more interest. On the second layout I added in scraps of pattern paper on the left hand side to add more detail and to fill in the “gap” that was used for extra journaling on the first layout. Plus using bits of pattern paper helped me use a sheet of pattern paper (the blue and pink stripes, reverse side is pink and white scottie dogs) that I really didn’t like at all, neither a nor b sides. I can throw in bits of my less favorite items to still use up the whole kit without feeling like the “ugly” product is ruining my page. (I have to say this is the ONLY thing so far I have really disliked in a kit.)
Hope you enjoy.